Terrace Wall Steps

E. P. Henry Terrace Wall comes 6-inches high, 16-inches long and is 12-inches deep.  It must be set on a compacted stone base and two layers are necessary for proper stability of steps.   Terrace Wall comes in four colors: Autumn Blend (red and gray mix), Pewter Blend, Harvest Blend (brown blend) and Dakota Blend (gray and brown mix).  Steps can be capped with either 3-inch thick Terrace Wall Caps or Bullnose pavers in a variety of different colors.  Flagstone treads can also be used as treads over Terrace Wall risers.
All steps shown were constructed by Robert J. Kleinberg Landscape Design and Construction.  He is an ICPI Certified Concrete Paver Installer and a NCMA Certified Segmental Retaining Wall Installer.  He is also an EP Henry Authorized Hardscaping Contractor, and has been designing and constructing patios, steps and gardens in Philadelphia, Montgomery County ( Lower Merion, Bala Cynwyd, Ardmore, Narberth ), Delaware County ( Havertown, Marple, Drexel Hill, Lansdowne, Springfield, Swarthmore, Ridley, Media, Upper Darby, Newtown Square, Radnor ), and the Main Line ( Bryn Mawr, Villanova, Gladyne, Wynnewood ) PA as a Landscape and Hardscaping contractor since 1986.

Please view some examples of our Terrace Wall interlocking block steps below.

 Click here for details of Step Construction

If you are interested in any of Robert J. Kleinberg Landscape Design & Construction services,  please fill out the contact form with your question or request for an estimate.
Click here for contact form
You can also contact us at (610)259-6106 or email us at RJK@kleinberg.com

Flagstone Treads On Pewter Blend Terrace Wall Risers
Steps are constructed on a 6-inch base of compacted crushed stone, and at least 8-inches of wall stones below grade.  Flagstone treads are installed with Segmental retaining wall adhesive.

Before:

Before:

Flagstone Treads On Pewter Blend Terrace Wall Risers 6

Before:

Before: